Custom High Precision FPM Ffkm HNBR NBR FKM Silicone EPDM Rubber Oring Seals

Basic Info

Performance	Temperature
Shape	O-Ring
Standard	Standard, Nonstandard
Customized Material	NBR, FKM, Silicone, EPDM, HNBR
Transport Package	PE Bag Inside, Carton Box Outside
Specification	Customized
Trademark	Lanhe
Origin	China
HS Code	4016931000
Production Capacity	1000000 Piece/ Day

Product Description

O-ring is a general purpose annular sealing device with a circular cross section (derived from the "O" in its name). The purpose of using o-ring seals is to prevent leakage and loss of liquid or gas. They are simple, convenient and have small installation space. Long term sealing performance can be achieved in static or dynamic seals as long as the tank design and material selection are correct and the operating conditions are within the temperature range of the rubber material.

The size of the O-ring is determined by the inside diameter ID and line diameter CS. O-ring size calculation: outer diameter = inner diameter + 2x wire diameter (OD = ID + 2X CS).

Rubber O Rings Information
Material	Hardness (Shore A)	Temperature	Standard	Available
NBR (Nitrile, Buna)	60-90	-40ºC - 110ºC	ID≤2000mmC/S≤40mm	AS-568 (America)
FKM (FPM)	70-90	-20ºC - 220ºC		JIS-B2401 (Japan)
EPDM	60-90	-45ºC - 150ºC		DIN-3771 (Germany)
VMQ (Silicone)	10-70	-55ºC - 204ºC		BS-1806 (Britain)
HNBR	60-90	-48ºC - 180ºC		ISO3601 (International)
FFKM/Kalrez	70-90	-18ºC - 326ºC
Resistance	Color	Certificate	Application
Engine Oil	Black	IATF16949	Automotive Industry
Hydraulic Fluid	Brown	ISO14001	Construction Machinery
Chemical	Green	ISO9001	Machine Tool Equipment
Ozone	Red	REACH	Water Treatment
Steam & Hot Water	White	SGS	Chemical Processing
Low Temperature	Blue	RoHS	Hydraulic Pneumatic
High Temperature	Customize	Food grade Wras/LFGB	Industrial Manufacturing

Company Profile

Dongguan Lanhe Electronics., located in Dongguan the world's manufacturing capital-China. is a manufacturer and service provider committed to providing customers with professional, high quality and efficient silicone rubber related products solutions.

Our mainly products cover electronics, vehicle medical, artificial intelligence, service and other industries, the main products are: O-ring, oil seal, hydraulic seal, sealing ring, rubber damping pad and other silicone rubber products etc.

Since its inception, the company has always been focused on product research and development and manufacturing, committed to cost optimization and continuous improvement of technology, excellence, quality as life, to provide customers with fast quality products and services, to win customers' consistent praise and high trust.

Our Advantages1.With over 60 molding machines. There are 12 machines of 500 tons, 24 machines of 300 tons which can meet the needs of key customers and the capacity of every machine is 7.05 million pieces per month.
2.The nitrogen freezing burr processor we used which is adopting advanced technology in china. The equipment is easy to operate with high efficiency and precision which remove the raw edges without damaging products.
3.The advanced full-size automatic measuring machine was introduced from Israel can make automatic quality inspection and sorting .The detection accuracy reaches 10μm and the speed reaches 300 pieces/min.
4.We have a professional customer service team with a complete service system and strong technical supports.5. Fast production & in-time delivery that never delay your project and usage.

6. One-stop custom service and value-added service to save your time and cost.

7. OEM/ODM Services are available. We can design and produce various Non-standard.Rubber Parts according to your PDF,3D or STEP drawing files.Certifications

FAQ

Q1:Are you a manufacturer or trading company?

A1: We are a factory with more than 20 years' experience.

Q2: Can you do OEM parts?
A2.:Yes, we mainly do customized rubber and plastic parts. OEM service is available.

Q3:Do you provide samples?
A3:Yes, we could provide samples for you.

Q4:What about the lead time?
A4:It takes 15-20 days for making mould.It takes about 3 days to prepare samples.It takes about 3-6 days for shipping samples by FEDEX, UPS, DHL,TNT.The production lead time for mass order is as per the quantity.

Q5:How do you control the quality?
A5:All raw material we use are brand and new, material properties is stable. Skilled workers take care every details in producing and packing process.Quality control department inspect the product quality in each process.

Q6: What materials are available to produce from your side?A6: NBR, EPDM, SILICONE, HNBR,FKM, FLS, etc. tc oi

Q7:What is your terms of payment?
A7: Pay deposit by TT in advance balance, pay the balance payment before shipping.